The case does not come with a Raspberry Pi.Does the case come with a Raspberry Pi?.The FLIRC Raspberry Pi 4 case is available from UK suppliers (£16), whereas the Argon NEO needs to be sourced directly from or (I used Seeed as this was part of a larger order). All you need to do is put your thermal pad on the CPU, drop your Raspberry Pi inside the case, and screw the bottom of the case on with the included screws. On price, the FLIRC is 15.95 and the NEO is 15, so pretty much the same. We haven't only been concentrating on Flirc, we've been concentrating on enhancing media centers and their experiences. Flirc is one of the best selling items for the Raspberry Pi.
Yes, designed, proven, and tested only for the Raspberry Pi 4B.Does the case support the Raspberry Pi 4?.If that’s not a deal-breaker for you, though, then this is a great case to get. If only the GPIO pins remained accessible. We love the style of the Flirc case, and its heat sink opens up a world of overclocking. This really is the secret sauce for Flirc as this design has been proven time and time again to work great at passively cooling a Raspberry Pi. We’re going to experiment some more with overclocking, which makes this a fun case. The Flirc Raspberry Pi case was designed to not only be functional for your Raspberry Pi, but to be drop dead gorgeous. The Flirc Raspberry Pi 4 Case is designed in a way that makes the entire metal body of the Flirc Case a big heatsink for the Raspberry Pi 4. We also played around with CPU clock speeds up to 2.0GHz, which idled at 48 ☌ and maxed out at 69 ☌. The overclocked Raspberry Pi (inside the Flirc case) idled at 41 ☌, and running our five-minute stress test took it up to 67 ☌. We took the CPU clock speed up to 1.75GHz. This time it idled at a mere 28 ☌ and our five-minute stress test took it up to a mere 46 ☌.īecause this is comfortably below the threshold, it opens up a world of overclocking (something that has been reintroduced on Raspberry Pi 4). Next, we put a Raspberry Pi into the Flirc Raspberry Pi 4 case and ran the same test. Unsurprisingly, the Raspberry Pi with no heat sink attached quickly went up to 79 ☌ and hovered at that level for the rest of the test, nudging up against (but not pushing over) the level where Raspbian starts to throttle the CPU. Warning! Don’t do this at home without doing your research first. For each test, we left the Raspberry Pi to run for five minutes. This puts all four cores of Raspberry Pi 4 under stress.
We used stress (apt install stress) and the following script from Core Electronics to test our Raspberry Pi 4 while measuring temperature: while true do vcgencmd measure_clock arm vcgencmd measure_temp sleep 10 done& stress -c 4 -t 300s Watch your Raspberry Pi and restart afterwards. WARNING!: Stress testing should only be done for short periods. We stress-tested a Raspberry Pi 4 board on its own vs a Raspberry Pi 4 inside the Flirc case to see what temperatures it reported. However, for many of us, GPIO pins are the very essence of Raspberry Pi. Whereas the official Raspberry Pi 4 case arrives as an ABS shell, the Flirc case opts for an aluminum core nestled between two black, soft-touch pieces. One of my favourite cases for the Raspberry Pi 3 is the Flirc case, and the Flirc Raspberry Pi 4 case doesnt disappoint. If you plan to use Raspberry Pi as a desktop computer, then this might be a valid trade-off. Best Looking Raspberry Pi 4 Case - Flirc Raspberry Pi 4 Case. But it’s an ungainly addition to such a lovely looking case. To Flirc’s credit, it has addressed this issue via a small gap on the underneath of the Flirc Raspberry Pi 4 case, which could be used with a breakout I/O cable. Unlike the official case, the lid cannot be quickly removed to provide access to the pins. One downside to the sealed approach is that the GPIO pins are hidden away inside the case. The microSD card slot is easily accessible, and a small cut-out on the enclosure enables the LEDs to shine through. Everything is neatly constructed from high-quality materials and there’s considerable charm to the heat sink. Putting together the case is ludicrously simple: you simply drop a Raspberry Pi in the bottom half, attach the thermal paste, squidge down the lid, and use four screws to hold everything together.įlirc claims that this is “the most beautifully crafted Raspberry Pi 4 case” and it’s not a wholly unwarranted claim. You use this to squidge the Raspberry Pi to the heat sink.
Inside the pack is a square thermal pad (similar in substance to Blu Tack). This turns the whole of the aluminium case into a giant heat sink, cooling down your Raspberry Pi 4. The result is a stylish and lovely-to-hold case made from solid metal. Here’s where things get clever: inside the case is a protruding heat sink that reaches down to Raspberry Pi 4’s CPU. The Flirc Raspberry Pi 4 case comes in two halves: the bottom is a soft-touch plastic shell, and the top half is milled aluminium coated with more soft-touch.